eK Leak Sensor is designed to alert users of any water leakage. It is connected to eKoral controller via bluetooth. Place the sensor flat on a solid surface where water leakage may occur. When leakage is detected, the sensor will send a warning signal to the eKoral controller which will then send a push notification to the user’s mobile device through the eKoral App. The user can also setup conditional control on the eKoral App to take appropriate actions when there is a leakage to prevent further damage. The sensor works in both freshwater tank and saltwater tank.
Compact & wireless
Power outage alert
Battery is replaceable
No mechanical installation
1-year stand-by time
Distance to a controller: 100m (328 ft) w/o obstacles Battery: Lithium Battery (CR2450) Humidity Requirement: 10 ~ 95% RH Temp. Requirement: -20 ~ +50 °C (-4 ~+122 °F) Dimension: 60x15mm (0.19 x 0.05ft)
All specifications are relating to average parameters and may vary depending on settings and operating conditions.
Contents: 1 x Level sensor
1 x Lithium battery (CR2450)
Size: 140x85x47mm (5.51″x3.35″x1.85″)
Weight: 61g (0.13lb)
This sensor must be in the range of an eKoral controller.
The sensor must not be submerged! Only the 3 contacts on the bottom side should be moisturized.
Sensor must be placed flat on a surface with the metal tips touching the surface.
Disclaimer: Fish Doctor and Darren Williams are not registered veterinary surgeons under the Veterinary Surgeons Act 1960 and do not practise veterinary surgery or provide any surgical or medical treatment of fish.